| Last Modified: 11-29-2007 | 1.6 A | |
| Service Category: Power Source/Network | Section: Battery/Charging | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM0000033Q3003X |
| Title: POWER OUTLETS (INT): VOLTAGE INVERTER: INSTALLATION (2008 Sequoia) | ||
INSTALLATION
1. INSTALL VOLTAGE INVERTER
|
(a) Install the voltage inverter with the 3 bolts. Torque: 7.5 N·m (76 kgf·cm, 66 in·lbf) |
(b) Connect the connector.
2. INSTALL QUARTER TRIM PANEL ASSEMBLY LH
3. INSTALL QUARTER TRIM PANEL ASSEMBLY LH (for Power Seat)
4. INSTALL REAR FLOOR MAT SUPPORT PLATE
5. INSTALL ROPE HOOK ASSEMBLY
6. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH
7. INSTALL REAR DOOR SCUFF PLATE LH
8. INSTALL REAR FLOOR STEP NO. 1 COVER
9. INSTALL REAR FLOOR STEP NO. 2 COVER
10. INSTALL REAR SEAT CUSHION HINGE LOWER COVER LH
11. INSTALL REAR NO. 2 SEAT ASSEMBLY LH (for Manual Seat)
(a) Remove the rear No. 2 seat assembly LH
.
12. INSTALL REAR NO. 2 SEAT ASSEMBLY LH (for Power Seat)
(a) Remove the rear No. 2 seat assembly LH
.
13. INSTALL DECK BOARD BRACKET
14. INSTALL DECK BOARD REINFORCEMENT SUB-ASSEMBLY
15. INSTALL NO. 1 DECK BOARD SUB-ASSEMBLY
16. INSTALL ROPE HOOK ASSEMBLY
17. INSTALL LUGGAGE COMPARTMENT TRIM BOX
18. INSTALL NO. 2 DECK BOARD SUB-ASSEMBLY
|
|